Haier air conditioning self-cleaning function operation method
¡ö Automatic:
1. The air conditioner runs for a total of 28 hours and enters self-cleaning after shutdown.
2. The air conditioner runs continuously for 46 hours. The air conditioner automatically shuts down and enters self-cleaning.
¡ö Can be set to automatically clean after shutdown. Setting method: In the standby state of power-on or power, press and hold down the "self-cleaning" key on the remote control, and press the "setting" key at the same time. After hearing "deep" three times, the setting can be completed; Cancel method: Press and hold the "self-cleaning" key of the remote control again, and press the "set" key at the same time, hear the "beep" two sounds, you can cancel.
¡ö Manual forced self-cleaning: When the air conditioner runs in other modes, press the self-cleaning key. If the compressor is on, the "self-cleaning" symbol on the display panel flashes for 3 times, and does not enter the self-cleaning operation. If the compressor is turned off, the air conditioner enters the self-cleaning function.
¡ö Note:
1. Set sleep function not to enter automatic cleaning;
2. Do not enter self-cleaning during defrosting; After each self-cleaning, it takes 10 minutes to enter the self-cleaning again;
3. In the self-cleaning, receive any signal display panel "self-cleaning" symbol flickers for 3 times, do not enter the self-cleaning;