Common sense for safe use of gas stoves

1. Often check whether the interface of the gas supply pipeline leaks, whether the rubber hose is intact, whether the aging cracks, once found, it should be replaced in time. The check steps are as follows:
(1) Please configure an appropriate amount of soapy water for leak detection.
(2) Open the air valve to make the air supply unimpeded.
(3) Check whether there is gas leakage at the connection of the pressure reducing valve (only applicable to liquefied gas) : Dip a small amount of soapy water, drop it at the beginning of the connection between the pressure reducing valve and the liquefied gas tank, observe whether there are bubbles, if there are bubbles, you need to consult the user to replace the pressure reducing valve.
(4) Check whether there is gas leakage at the interface of the connected hose: experiment with the above detection method.
(5) If the above method still can not remove the leakage phenomenon, it is necessary to inspect the door
2. The user of the stove should regularly clean up the fire hole on the fire cover to prevent blockage and should often clean up the dust, spider webs and other debris in the stove head.
3. After the stove fire cover is damaged, be sure to buy the original product, and cannot be replaced at will, so as not to cause poor combustion status.
4. When the air intake hose is used for a long time, it will age or be damaged, forming a safety hazard. Therefore, the intake hose should be replaced in time when there is an aging phenomenon, and it should not be used after adhesive tape.
5. Users who use artificial gas or other special gas sources should often clean the fire hole on the fire cover to avoid blockage.
6. The gas source is different, and the gas stove used should also be different, which should be noted when purchasing. If the air source you use has changed, be sure to ask the original manufacturer to make the corresponding transformation of your stove before use.
7. Do not stay away from the gas stove. In case of leakage or due to accidental reasons (wind, water overflow, etc.) when the flame is extinguished, the main switch of the air source should be turned off immediately, the doors and Windows should be opened, and the ventilation should be rapid, remember not to ignite or switch the electrical appliance to prevent the spark from detonating the gas.