What are the methods of air conditioning to save electricity

1. Do not set the temperature too low when the air conditioner is in use. Because the lower the temperature controlled by the air conditioner, the more electricity is consumed, it is generally necessary to reduce the indoor temperature by 6 to 7 degrees. (Refrigeration use 22-28 degrees, heating use 18-24 degrees)

2. When cooling, the room temperature is 1 degree higher, and when heating, the room temperature is 2 degrees lower, both can save more than 10% of electricity, and the human body is almost unaware of this small difference.

3. Set high cooling/high heat when starting up, in order to achieve the fastest control purpose; When the temperature is suitable, change the medium and low wind, reduce energy consumption and reduce noise.

4. The "ventilation" switch cannot be in the normally open state, otherwise it will increase power consumption.

5. Less opening doors and Windows can reduce the heat entering the outside of the room, which is conducive to saving electricity.

6. In the room with air conditioner, it is best to use thick curtains to reduce the loss of cool air.

7. The indoor and outdoor machine connection pipes do not exceed the recommended length, which can enhance the cooling effect.

8. To install the air conditioner, try to choose the dark side of the room to avoid direct sunlight on the fuselage. If this condition is not available, the air conditioner should be covered with a sunshade.

9. Periodically remove dust from the outdoor heat sink to keep it clean. Too much dust on the heat sink can greatly increase the power consumption.